Team Sub-Groups‎ > ‎Programming‎ > ‎

21 Jan 2015 D-Link setup

posted Jan 22, 2015, 5:09 AM by Rob Owings   [ updated Oct 4, 2015, 12:05 AM by Jeffrey Kangas ]
Found a guide for setting up the DLink after using the reset option if it is not working... switch to AP mode, plug in with a wire and manually set your machine IP to 192.168.0.x (where x is anything BUT 50).  Go to browser and put 192.168.0.50 in address bar and the router should appear.  Set the wireless SSID network name to teamname-routeryear, set password to one we know.  Set the LAN IP address to manual and use 10.TE.AM.1 and then you should be good to go.

Also, when using the same laptop with different year communications:  '09-'14 robots have a different setting in the driver station setup than '15 does.  If the robot/c rio is set for '15 and you are running '15 code, you should likely be using '15 protocol.
Comments